Click image to enlarge
Description
Replacement Strut Coupler (For 675A Strut Pump) is used to connect to the inflation valves of most General Aviation Aircraft struts. They are used in conjunction with a strut pump or a nitrogen bottle to deliver the pressurized air needed to inflate a landing gear strut. One end fits directly to the strut and the other has a 1/8" NPT Female thread.
Nominal Pipe Size Accommodated: 0.125 Inches 1St End
Thread Class: 3B 2Nd End
End Item Identification: F/A-18 Hornet, A-6E Intruder, S-3B Viking Aircraft. Low Altitude Navigation & Targeting Infrared System (Lantrin). B-52 Aircraft Support Equipment. Virginia Class Cgn (41). Intercept Guided Missle.
Connection Style: Plain (Pipe) 1St End
Connection Style: Swivel Nut, Gasket Seal (Hose) 2Nd End
Leg Length: 0.980 Inches Minimum 2Nd End And 1.020 Inches Maximum 2Nd End
Leg Length: 1.730 Inches Minimum 1St End And 1.770 Inches Maximum 1St End
Connection Type: Threaded Internal Hose 2Nd End
Connection Type: Threaded Internal Pipe 1St End
Nominal Thread Size: 0.125 Inches 1St End
Nominal Thread Size: 0.312 Inches 2Nd End
Flow Angle: 70.0 Degrees
Pressure Rating: 5,000 PSI
Criticality Code Justification: Feat
Nominal Inside Diameter Hose Accommodated: 0.625 Inches 2Nd End
Special Features: Weapon System Essential
Material: Copper Alloy Overall
Thread Series Designator: Unef 2Nd End
Thread Series Designator: Npt 1St End