TRIG TT31 XPDR W/ 4FT WIRE PIGTAIL ASA-00267-SUClick here to purchase or contact the seller of this item on eBay |
![]() |
|
Current Price: 3,688.99 USD |
Product Specification:
Overview
Specifications
Documents
Features
** , in most cases items will be ready to be shipped on or before promised delivery dates on eBay, in some cases the item will have to be obtained directly through the manufacturer and can take a before it is ready to be shipped. We will not be able to provide any estimated lead time or shipping time as it is defined by the manufacturers availability. Pay attention to dispatch time/handling timefew months** All photos are , verify you are buying the correct product using the Model/SKU number.stock photooriginal** , in case of any return being accepted (case by case) you will be charged plus the Most items are non-returnable20% restocking fee and return shipping cost.** If this product is subject to a core return, you will have 5 days from the day you place the order to send your core to us. Please contact us for core return information.
Shipping Policy for the rate shown in shipping section of the listing.Less than 1lb will be shipped USPS, Fedex or UPSand you will be paying the shipping fee charged by the carrier.Above 1lb and below 50 lbs will be calculated after checkout and you will be responsible to pick up , we may be able to help you with freight quotes but .Above 50 lb will be freight the buyer will be responsible to arrange shipping and pick up
TrigÕs TT31 transponder is the perfect retro-fit for the popular Bendix King KT76A and KT78A transponders. The TT31 is a certified Class 1 transponder which will Ôplug and playÕ straight into the existing Bendix King tray. This significantly reduces both installation time and cost. It provides pilots with class leading Mode S technology that is also 1090ES ADS-B Out capable too (ADS-B functionality requires a Trig tray).
Mode A and C transponders are now being replaced by Mode S transponders, technology which is optimised for tomorrowÕs airspace requirements. Around the world the introduction of ADS-B surveillance technology means the modern transponder has now become the heart of future airspace compliance requirements. Here the TT31 remains the transponder of choice. The TT31 was the worldÕs first transponder certified to TSO C166b. This is latest FAA standard for the U.S. 2020 ADS-B mandate and demonstrates TrigÕs advanced levels of compliance. Pilots can buy the TT31 with confidence. Not only is it the easiest upgrade path for their old BK transponder, with a Trig TT31 tray installed the same transponder is mandate ready. The TT31 uses half the electrical power of the leading competitor transponder, whilst still transmitting at a higher signal power, its efficient design reduces waste heat in the avionics stack. This reduces the load on the aircraft electrical system improving overall reliability. The flexible power input means that both 14 and 28 volt systems can be used without special configuration or dropper resistors (we recommend that any dropper resistor fitted for a previous transponder should always be removed). The TT31 is compatible with both parallel and serial altitude encoders; it can even act as a serial altitude repeater to provide a convenient altitude source for your GPS. The TT31 is popular in the U.S. where a certified WAAS GPS, and a ground air determination device are also required forming the ideal 2020 ADS-B solution. ItÕs worth remembering that to receive all ADS-B In transmissions in the U.S. the FAA requires a functioning certified ADS-B Out device, so donÕt miss out on airspace information - fit a Trig TT31. All Trig products come with a two year warranty, supported by our global network of Approved Trig Dealers and Approved Trig Service Centers in the U.S. and Australia. |
![]() |
Click here to purchase or contact the seller of this item on eBay