LED display replacement for King KY196A / KY197A radios, DYI(do it yourself)Click here to purchase or contact the seller of this item on eBay |
|
|
| Current Price: 510.00 USD |
This is a DYI (do it yourself) LED display replacement for King KY196A and KY197A COM radios.
DYI installation involves no modifications to your KY196A 197A com radios. All you have to do is pull the old display out from its socket, and then plug the new LED display into its place. And then connect the two power wires (long red wire and a short black with ring connector) to correct locations.
For installation, you will need a soldering iron, solder, phillips screw driver.
This LED display will NOT work for KY196, KY197, KY96A, KY97A radios.
The KY196A radio in the picture is NOT included in sale – it is for demonstration purpose only.
CAUTION
This LED display is custom designed and has not been through any FAA certifications. It is mainly intended for experimental, none-airborne radios and some private aircraft owners and individuals who want to exercise ownership and would like to work on their own aircraft. If you would like to install it in a registered aircraft, we strongly suggest you check with proper authority first.
If you don’t already have a power cable harness for KY196A 197A that allows you to power up KY196A 197A radio using a DC power supply on the bench, we highly recommend to buy the LED display & Power Cable Hardness combo on our other listing. This is very convenient tool because it allows you to check the LED display you have just installed if it is working properly before you put it back into the tray in instrument panel. It is very useful in case you need to troubleshoot.
|
|
|
|
|
|
Click here to purchase or contact the seller of this item on eBay