David Clark H10-60 Headset (New)Click here to purchase or contact the seller of this item on eBay |
|
|
| Current Price: 180.00 USD |
Overview & Features
• The H10-60 is a premium passive noise-attenuating headset designed for pilots who fly frequently and need reliable comfort and performance. 
• It is approved under FAA TSO C57b and C58a, and exceeds RTCA/DO-214 standards. 
• It offers interchangeable cord assemblies via a “dome jack” design, allowing you to switch between different cord/plug setups (e.g. for fixed wing or helicopter use).
⸻
Construction & Comfort
• Head pad: Super-soft foam/air-flow pad for comfort over long flights. 
• Ear seals: Comfort-Gel, undercut design for better seal, more interior space, and lighter weight. 
• Adjustability: Headset pressure adjustment and headband size adjustment to help with fit. 
• Dual volume controls: You can adjust levels independently for each ear. 
• Boom / mic: Uses a patented flex/wire boom for precise microphone placement. The mic is an M-7A amplified electret type. 
• Boom guide lock: Helps maintain boom position. 
SPECS
Spec
Value
Noise Reduction Rating (NRR)
23 dB
Weight (without cable)
~ 22 oz (≈ 651 g)
Earphone Type
Dynamic
Earphone impedance
150 Ω (each ear, wired in parallel)
Earphone frequency response
200 – 5,500 Hz
Mic impedance
50 Ω ± 20%
Mic sensitivity
400 mV ± 6 dB into 150 Ω load @ 1 kHz (for 114 dB SPL input)
Mic frequency response
300 Hz – 3,500 Hz (per RTCA DO-214)
Mic supply voltage
8–16 V DC, not polarity sensitive
Cable / plug
For fixed wing version: ~5 ft straight cord with dual plugs (PJ-055 & PJ-068)
|
Click here to purchase or contact the seller of this item on eBay