High-Accuracy Current Sensor 5v input 7-30v supply for Dynon, MGL, Garmin etc


Click here to purchase or contact the seller of this item on eBay

Current Price: 59.00 USD


"YOU'RE NOT ALONE."   We know you're CRAZED! We know you need various things to keep you flying!
Our goal is to provide them to you CHEAP so you can spend more money on AVGAS!

 


 High-Accuracy Current Sensor 5v input 7-30v supply for Dynon, MGL, Garmin etc

Many current sensors on the market are sensitive to stray magnetic fields and can be very inaccurate, sometimes off as much as +/- 5 amps.

When monitoring sensitive aircraft equipment this just isn’t good enough!


The ME CS-6CB is a HIGHLY ACCURATE current sensor that uses special technology to read current loads down to +/- 0.1amps by intelligently ignoring error caused by the earth magnetic field and other stray magnetic fields found within your aircraft.

Measuring current with a current shunt and an electronic EMS is often difficult in the high electrical noise environment of an experimental aircraft, particularly ones with a Permanent Magnet (PM) alternator. The shunt method also requires breaking a wire to insert the shunt and care in mounting the shunt to protect it from shorts, which is difficult to say the least!  Choose the high-accuracy ME-CS-6 instead! The CS-6 can also be bundled with other wires if 1 inch separation is maintained from other high current carrying wires.  

The ME-CS-6CB is easy to install using just shrink tubing and zip-ties, and is compatible with any display device expecting 0-5v current sensor input. It is easy to calibrate using a simple process that yields exceptional accuracy.


VERSIONS:
The CS-6 is available in two versions, click below to choose your required version:
The CS-6AB is powered by 5 Volts
The CS-6CB is powered by 7 to 30 Volts


SPECIFICATIONS:
CS-6CB This is the basic version designed to be operated with Engine or Flight monitoring systems that provide 5 volts to supply external sensors and accept a 0-5v input with zero current being at 2.5 volts. No input voltage protection beyond 30v, wire with caution.


Output: 0-5V with 2.5 volts a zero current.
Sensitivity when mounted on a #8 aircraft wire: 38 mV / A
This results in a maximum current sensing of: +/- 65 A
DC Voltage input: 7-30 V
Current draw 35 mA
Power on is indicated by a LED.

FOR COMPLETE INSTALLATION DETAILS, VIEW THE INSTALLATION AND SPEC SHEET MANUAL on CRAZEDpilot.com.





COMPATIBLE SYSTEMS:
Dynon Skyview

Install Manual P. 7-53
Internal 5V available
Use CS-6AB
If 5v supply unavailable, use 7-30V Use CS-6CB


Dynon EMS-D10
Install Manual P 3-13
Internal 5V available
Use CS-6AB
If 5v supply unavailable, use 7-30V Use CS-6CB


Dynon EMS D120
Install Manual P. 3-13
Internal 5V available
Use CS-6AB
If 5v supply unavailable, use 7-30V Use CS-6CB


Dynon Flight Deck 180
Install Manual P3-13
Setup P. 6.15
Internal 5V available
Use CS-6AB
If 5v supply unavailable, use 7-30V Use CS-6CB


Grand Rapids Technology EIS 2000
Use Aux Input
Internal 5V available
Use CS-6AB
If 5v supply unavailable, use 7-30V Use CS-6CB


Grand Rapids Technology EIS 4000/6000
Use Aux Input
Internal 5V available
Use CS-6AB
If 5v supply unavailable, use 7-30V Use CS-6CB


Garmin G3X
Install Manual P 18-17, 28-118, 28-128
Internal 5V available
Use CS-6AB
If 5v supply unavailable, use 7-30V Use CS-6CB


MGL RDAC XF
Use “Curr” input
Internal 5V available Use CS-6AB
If 5v supply unavailable, use 7-30V Use CS-6CB


 


The item will be packed with great care and shipped via the shipping method listed at the bottom of this auction. We only ship to VERIFIED PayPal addresses as provided by PayPal.  If you have any claims that the item has been damaged upon receipt, it will be your resonsibility to handle that through normal USPS or UPS claims process.

We have fully and accurately described the item, should you have any additional question please ask BEFORE you bid. Make your decision of purchasing this item prior to your bid - all sales final! (Please understand this is to prevent a buyer from receiving a delicate item, dropping or damaging it, and then claim the item was "not as described".) To use PayPal for payment, buyer is required to be a VERIFIED PayPal account holder. 


High-Accuracy Current Sensor 5v input 7-30v supply for Dynon, MGL, Garmin etc High-Accuracy Current Sensor 5v input 7-30v supply for Dynon, MGL, Garmin etc High-Accuracy Current Sensor 5v input 7-30v supply for Dynon, MGL, Garmin etc
High-Accuracy Current Sensor 5v input 7-30v supply for Dynon, MGL, Garmin etc


Click here to purchase or contact the seller of this item on eBay