US AIRFORCE BOEING KC 135 INFLIGHT REFUELER GAS TURBINE ENGINE APU T41-M-9Click here to purchase or contact the seller of this item on eBay |
||
Current Price: 8,000.00 USD |
THIS LISTING IS FOR
ONE T41-M-9 APU FROM THE USAF BUT SHOWING SOME PICTURES OF ALL THREE T41-M-9
APUS FROM THE USAF WE HAVE IN TOTAL -
Call or email Paul for details anytime +61 473 491820
prcturbinetechnologies AT outlook.com.au
· CHECK
OUT THE OTHER TWO T-41M-6 LISTINGS WE HAVE FOR MORE PICS AS IVE
SPREAD THEM ALL OVER 3 LISTINGS SO PEOPLE CAN GET A GOOD LOOK AT ALL
3 IN GREAT DETAIL WITH PICS SHOWING SHINY NEW IMPELLERS, AND OTHER SHINY NEW
PRICEY PARTS FITTED BY THE USAF AND MORE.
· IN
SOME OF THE PICTURES YOU WILL SEE ME HOLDING A COMBUSTION CHAMBER AND NOZZLE
ASSY THAT IVE REMOVED OFF ONE OF THE ENGINES FOR INSPECTION TO VERIFY THE
ENGINES LOW HOURS SINCE OVERHAUL HOUR CLOCK.
· AND
ALSO YOU WILL SEE IN PICTURES THAT IVE TAKEN A STAINLESS STEEL COVER OFF
THE FUEL CONTROL, GOVERNOR UNIT BOX TO VERIFY THAT'S ITS NICE IN THERE AND
TO SHOW PEOPLE WHATS BEHIND. THAT'S THE ONLY SPANNERING IVE DONE WITH THESE
UNITS.
All 3 APUS are complete with low hours since
overhaul ranging from 233 - 71 hours from overhaul and many across all 3
units have newly fitted life limited critical parts (impellers,
combustors, fuel control units, governors) components fitted by the USAF on all
3 units, all come with all accessories and each with its own AC 3 Phase 400 HZ
Generator and DC starter motor, ready to run. Saw cut direct strait out from
the USAF KC135 fuselage decommission. All critical controls have been lead tag
sealed by the US Air force.
·
EACH USAF T-41M-9 WE HAVE IS FOR SALE FOR $8,000USD
EACH
·
YOU GUYS CAN PICK THE ONE YOU WANT FROM SERIAL
NUMBER
·
OR GIVE US A DESCRIPTION WHICH ONE YOU WANT.
·
YOU CAN ALSO CALL US ANYTIME OR EMAIL AND TELL US
WHICH ONE YOU WANT OUT OF THE 3 WE HAVE AND ITS YOURS - ITS TOO EASY -
WHO BUYS IT CAN DO WHAT THEY LIKE WITH IT real life
past examples – ALL GROUND USE APPLICATIONS …………. subsonic, hyper-sonic and
supersonic military missile and aircraft UAV and manned aircraft wind tunnel
wind generator, electrical power for several suburbs or small city, ground air
and or electrical power for aircraft or special applications that require huge
unimaginable must be seen to be believed amounts of electrical power and
compressed air supplied simultaneously at a feather weight the size
of a mouse and mobile. Aviation maintenance colleges for in
hangar pressurization of airliner fuselages and aircraft pneumatic
systems testing and training, universities, off shore or underground horizontal
drilling power sources, high speed gas dynamics technical training and
research , aerospace training aids, research organizations,
government proof of concept hydrogen fuel burning turbine energy generation
display, healthy boys toys for fun healthy boys, mobile rotor wing
aircraft deployed high energy land mineral and fossil fuel surveying
radar electrical power source.
Happily We insist, promote, support, welcome
personal intimate inspection by anyone any time prior to purchasing - can be
arranged 24 hours a day 7 days a week - located 15 minutes from Melbourne
international airport Victoria Australia. Don’t be afraid to Call text or email
and always remember real aerospace people are zero arrogance zero attitude nice
people.
US citizens get free entry into the USA with zero duties, zero import taxes and tariffs etc., as these come under a special class set out by the United States of America Department of homeland security.
“Return of America made goods” form 3335 which is specifically for a aerospace
components like this that are not enhanced, repaired or increased in value in
any way shape or form from process or labor work carried out this end and
additionally the USA and Australia have a free trade agreement-
We sort all that major soul draining stuff out like paperwork.
99.99999%
of everything I’ve ever done that’s fun and worth doing, It always
eventually goes back to country of origin with a new happy US owner in some way
shape, form or another –
§ We
can easily happily arrange Shipping air or sea to anyone anywhere anytime with
our shipping accounts or yours FedEx - DHL - UPS etc. or whoever you may wish.
§ Close
PAYING friends with the USA TO AU – AU TO USA big-time SEA/AIR freight guy.
§ Making
shipping zero nightmare for me and you.
§ Please
check out the other listings I have
Call or email Paul for details anytime +61 473 491820
prcturbinetechnologies AT outlook.com.au
· THE
DETAILS OF ALL GAS TURBINE ENGINES BIG AND SMALL WE HAVE FOR SALE ARE IN A
SIMPLE LIST OF 10 ENGINES AND BASIC DESCRIPTIONS BELOW.
· WE
WILL GET EACH ONE LISTED UP PROPERLY IN TIME SO PEOPLE KNOW WHAT THEIR LOOKING
AT IN DETAIL AND PRICING AND ALL THAT STUFF OK.
· IN
THE MEAN TIME IF ANYONE WANTS ANYTHING LIKE INFO OR PRICING ON ANYTHING ON THAT
LIST BELOW YOU LET US KNOW OK - LOOK AROUND AND YOU FIND OUR NUMBER AND MAIL
PRETTY SOON. …THANKS
We currently have
listed below 10 once in a life time opportunity, "too good to be
true" aircraft gas turbine engines for sale at affordable down to earth
prices. So healthy boys can now afford to play with "High Value"
and "High Fun value" healthy boys toys.
AEROSPACE
DYNAMICS AUSTRALIA
- 3 x solar T41M gas turbine engines which are
Strategic Air Command SAC, U.S AIR FORCE T41-M-9 APU's From Boeing KC-135
inflight refuelling aircraft currently listed. All 3 APUS are complete
with low hours since overhaul ranging from 233 - 71 hours from
overhaul and many across all 3 units have newly fitted life limited
critical parts (impellers, combustors, fuel control units, governors)
components fitted by the USAF on all 3 units, all come with all
accessories and each with its own AC 3 Phase 400 HZ Generator and DC
starter motor, ready to run. Saw cut direct strait out from the USAF KC135
fuselage decommission. All critical controls have been lead tag sealed by
the US Air force.
- 1 X Solar T41M gas turbine engine compressor generator, zero hours
since new, brand new, frozen in time from 1956, unmolested by tomb
raiders. Solar OEM display engine.
- 1 x fully overhauled, zero hours since fully overhaul, Allied
Signal Garrett Airesearch Honeywell GTCP660-4 Boeing 747 gas turbine
engine compressor generator auxiliary power unit APU complete. $1.6
million USD was just spent on the full overhaul carried out by Arizona Air
Repair USA by Evergreen Airlines before the bankruptcy. Complete with
all accessories, preserved and crated.
- 1 x as removed (AR) Allied Signal Garrett Airesearch Honeywell
GTCP660-4 Boeing 747 gas turbine engine compressor generator auxiliary
power unit APU complete with all accessories and crated -
Removal carried by Jet Midwest USA.
- 1 x U.S AIR FORCE, NATO, ZERO HOURS SINCE NEW military cargo
Star-lifter Aircraft Honeywell Garrett Airesearch GTCP85-106A gas turbine
engine compressor power generator auxiliary power unit APU with
hydraulic starter motor. ( the star-lifter had a APU hydraulic start
system that was energized by hydraulic accumulator, the mounting pad for
the hydraulic starter motor on the APU is the same as all GTCP85 and
GTC85 DC starter motors which is an easy swap over for anyone, we can
source a starter motor for any buyer that wants that.
- 1 x U.S AIR FORCE Honeywell Garrett Airesearch GTCP85-102 NATO, Atlas,
Minute man 1, thermonuclear payload warhead delivery ICBM launch silo
faculty emergency power station, gas turbine engine back up electrical DC
and AC aircraft generator, compressed air and hydraulic power source APU,
16 hours since full overhaul at T.E.A.D USA BY U.S MARINES CORPS. Lead
tagged and sealed by U.S Marine Corps. Engine NSN
2835-116-8684, Model number: GTCP85-102 Part number: 378452-2
Series 3,
- 1 x U.S AIR FORCE Honeywell Garrett Airesearch GTCP85-102 NATO,
Atlas, Minute man 1, thermonuclear payload warhead delivery ICBM
launch silo faculty emergency power station, gas turbine engine back
up electrical DC and AC aircraft generator, compressed air and hydraulic
power source APU, 8.7 ( yep eight point seven) hours since full overhaul
at T.E.A.D USA BY U.S MARINE CORPS. Start counter 273, every critical
setting lead tagged and sealed by U.S Marine Corps. Gear Box NSN
2835-00-001-7723, Engine NSN 2835-116-8684, Serial number: 52P-13570 Model
number: GTCP85-102 Part number: 378452-2 Series 3,
- 1 x U.S AIR FORCE LIGHT WEIGHT PARACHUTE
DELIVERABLE MA1A SPECIAL USAF CONFIGURATION GAS TURBINE
ENGINE HUFFER START CART Garrett Airesearch GTC85-70 complete and
running like a dream in a special light weight made unit made from aircraft
aluminum U.S Air Force military ground air start cart configuration,
complete with all accessories like serviceable high temperature Bleed air
hose, mechanical metal swivel joint nozzle, 150 foot long cable with
remote engine control box and bleed air control foot pedal switch, all
critical adjustments Lead tag sealed by USAF, Kelly Air force Base Texas
USA who looked after this special baby right up until I took ownership of
it. 292 hours since overhaul on clock, comes with spare working electrics,
igniter/exciter box, engine control box, hour meter timer box with 40
hours rolled over, brackets, plugs and wiring, oil pressure switch,
instrument control panel with some gauges. Fire wall ID Tag Serial number:
77P3296, Model number: GTC85-70, Part number: 376660-0-1. ID tag on
chassis vertical engine mount beam: Part number: 375433, Series 2, Model
number:GTCE85-15-1
Please click
“see other items” To view.
Call or email Paul for details anytime +61 473 491820
prcturbinetechnologies AT outlook.com.au
Formally
"aerodynamics2006" (1077) 100% Positive Feedback for the last 18
years. Member since: 29-Apr-06 in Australia. Famous globally: With a unique
impeccable feedback history of hard work across the whole planet for building,
selling, supplying information regarding scientific, medical, industrial
lasers, aircraft gas turbine engines, PRC laser high power industrial fast
axial flow Co2 turbine compressor overhauls, repairs and sales, and PRC laser
High Voltage power supply overhaul sales testing and support, please ask me for
my feedback list: here is a direct cut n paste snippet from my feedback history
of 3 of over a 1000 happy customers…... "he knows his stuff PRC LASER
TURBO FLOW COMPRESSOR Turbine REBUILDS, REPAIRS, SALES, Worldwide. (#173112978945
) US $7,000.00 zedindustries (1398)"-"International shipment was
early and hassle free SKF OIL INJECTION KIT SKF-729101-300-MPA NEW UNUSED
COMPLETE KIT HYDRAULIC PRESS (#173131406727) AU $1,900.00 jtheriot85
(100)" -"Thanks Paul hope you can help me again soon COHERENT KRYPTON
ION ARGON ENTERPRISE II LASER SYSTEM #260699097185) US $4,200.00 6321theron
(1255)"
WORLDWIDE
CUSTOMER REFERENCE LIST FOR AEROSPACE DYNAMICS,FOR PRC LASER TURBINE COMPRESSOR
AND HIGH VOLTAGE POWER SUPPLY OVERHAULS, REPAIRS, CHANGE OVER’S, TESTING,
SALES, SERVICE AND TECH SUPPORT
UNITED STATES GOVERNMENT
Head Physicist / LSO: Joshua Hadler CLSO
Applied Physics Division (686)
NIST LABORATORY UNITED STATES [email removed by
eBay]
ph: [phone removed by eBay]
fx: [phone removed by eBay]
US GOVERNMENT NIST LABORATORY
325 Broadway St. M.S. 686.00
Boulder, COLORADO 80305
UNITED STATES OF AMERICA
Attn: Mary Gorman
Wright, Sue (Fed) [email removed by eBay]
Gorman, Mary (Fed) [email removed by eBay]
U.S GOVERNEMNT NIST LABORATORY
Kyle Rogers
Lead Mechanical
engineer
Lead Calibration
U.S GOVERNEMNT NIST LABORATORY
National Institute for Standards and Technology
325 Broadway
Boulder, CO 80305
[phone removed by eBay]
[email removed by eBay]
NASA
JET PROPULSION LAB
Address: 4800 Oak Grove Dr, Pasadena, CA 91109,
United States
P: [phone removed by eBay]
F: [phone removed by eBay]
Federal Laboratory Consortium
111 West Jackson Blvd.
Suite 1412
Chicago, IL 60604
Phone: +1-847-686-2298
Email: [email removed by eBay
U.S AIR FORCE
Dept. of Defence U.S GOVERNMENT
USAF AFTC, AIR FORCE TEST CENTER
307 E. Popson Avenue
Edwards AFB, CA 92354-6842
United States
Laboratory Representative: Douglas Hoffelt
AFTC ORTA
E: [email removed by eBay]
P: [phone removed by eBay]
F: [phone removed by eBay]
K and S services
MSPR-LLC
Servo drive overhaul, servo motor,
Electro hydraulic servo valve
Overhaul specialists.
Electrical hydro mechanical repair
And testing Remanufacturing.
Hanh Do, [email removed by eBay]
John Fleming, [email removed by eBay]
1608 John Papalas Drive
Lincoln Park, Michigan 48146
[phone removed by eBay] UNITED STATES
MURPHY LASER SERVICES
MARC MURPHY
GLOBAL SENIOR ELECTRONICS ENGINEER
OEM PRC LASER CORP USA,
LASER SERVICE TECHNICIAN/TRAINING/
PH: 973 229 9754
BANGOR PN UNITED STATES
PM PACKAGING MEXICO
Address: Producción 17, Mesa de Otay, 22435
Tijuana, B.C., Mexico
Phone: +52 664 624 0320
Marco Vazquez
[email removed by eBay]
Vermont Plastic Specialties Inc.
209 Blair Park Rd,
Williston, Vermont 05495, United States
Phone: +1 802-879-0072
802879639-2043
Mike -shop manager
Joseph- financial controller
[email removed by eBay]
R.E.D. Industries, Inc.
671 E. 9 Mile Rd. Hazel Park,
MICHIGAN 48030-1957. UNITED STATES
CONTACT NAME: PAMELA MATHEWS (president)
EMAIL: [email removed by eBay]
CONTACT NAME: DAVID MATHEWS: PHONE CELL: [phone
removed by eBay]
EMAIL: [email removed by
eBay] Office [phone removed by eBay]
Precision Fab Inc. (PFI)
Address: 259 Elm St, Aylmer, ON N5H 3H3, Ontario
Canada
Phone: +1 519-773-5244
Henry Bergen IV
t. [phone removed by eBay]
c. [phone removed by eBay]
[link removed by eBay]
Henry Bergen IV
[email removed by eBay]
HK Laser & Systems
Kevin Puumala
Service Manager
1296 Humbracht Circle
Bartlett, UNITED STATES
Office: [phone removed by eBay]
Mobile: [phone removed by eBay]
PFI USA Engineered Solutions
5963 Jaysville-St Johns Road
Greenville, Ohio, 45331 UNITED STATES
PFI USA ENGINEERED SOLUTIONS
5963 JAYSVILLE, ST JOHNS ROAD GREENVILLE,
OHIO, 45331, UNITED STATES OF AMERICA
CONTACT NAME: David Rabel
CONTACT PH: [phone removed by eBay] EMAIL: [email
removed by eBay]
LASER TECH NEW YORK
Address: 3212 U.S. 9, Cold Springs,
NEW YORK 10516, United States
Phone: +1 845-265-5540
Vice President: John baby Varvara
[email removed by eBay]
[phone removed by eBay] office
[phone removed by eBay] fax
Precision Mounting Technologies Ltd.
515 58th Ave SE, Calgary, AB
T2H 0P7
Phone
Call us toll free: [phone removed by eBay]
Within Calgary: [phone removed by eBay]
[email removed by eBay]
Artios DieS
Tijuana B.C. Mexico
+52(664)285 6213
Nicolas Gonzalez Owner/president
[email removed by eBay]
English/Mexican Translator/ friend for Nick
Anntonio Soberanes <[email removed by eBay]>
HBI Services Inc.
Director of Manufacturing
Rick Nacke <[email removed by eBay]
P.O. Box 4609, Tulsa, OK 74159 UNITED STATES
1313 S. Lewis, Tulsa, OK 74104 UNITED STATES
(918) 665.8220 | FAX: (918) 665.8225| Cell :( 918)
269.0726
WWW.HBISERV.COM
HBI Services Inc.
Jason Foster,
HBI internal Maintenance training, Programming and
Planning
P.O. Box 4609, Tulsa, OK 74159 UNITED STATES
1313 S. Lewis, Tulsa, OK 74104 UNITED STATES
(918) 665.8220 | FAX: (918) 665.8225| Cell:( 918)
269.0726
Hasty-Bake Headquarters,
Tulsa Grill Store & Grill Manufacturing
Facility
Richard Alexander PRESIDENT/OWNER
[Email removed by eBay]
1313 S. Lewis Tulsa, OKLAHOMA 74104 UNITED STATES
Toll Free: 800-4AN OVEN or [phone removed by eBay]
Phone: [phone removed by eBay]
Fax: [phone removed by eBay] 313 S. Lewis, Ave.
Tulsa,
Oklahoma 74159 UNITED STATES
Phone: [phone removed by eBay]
ADAMS TECHNOLOGIES
Ellen Adams PRESIDENT/OWNER DIRECTOR.
[email removed by eBay]
SDS/AdamsTech
6235 Lookout Road, Suite A
Boulder, COLARADO 80301 UNITED STATES
[phone removed by eBay] Service: [phone removed by
eBay]
Laura Venegas Adams Technologies
Cel y What’s app [phone removed by eBay] (USA)
E-Mail: [email removed by
eBay] [link removed by eBay]
PRC laser technician for Adams
tech [email removed by eBay]
Servicios Calados y Mas S de RL de CV
ADAMS TECH PRC LASER TECHNICIANS in Mexico FOR
turbines and power supplies,
León Cavallo 263 Colonia Vallejo Delegación Gustavo
a Madero
México D.F. C.P. 070870 R.F.C.
SCM080606F54
[email removed by eBay]otify: PG Servicios
Aduanales, S.C.
Montecito 38, piso 25, oficina 28, Col. Napoles.
Tel: 01(55) 5488 0094 Angelica Jimenez [email
removed by eBay] SofiaGonzález [email removed by eBay]
ArtiFlex Manufacturing | ITS Division Automotive
stamping plant line
Scott Wyckoff | Technology & Continuous Improvement
Specialist
Grand Rapids 731 Broadway Ave
Grand Rapids, MICHIGAN 49504 UNITED STATES
P: [phone removed by eBay]
F: [phone removed by eBay]
Zed Industries, Inc.
P.O. Box 458 3580 Lightner Road
Vandalia, OHIO 45377 UNITED STATES
Owner/President: Peter Zelnick
Email: [email removed by eBay]>
Phone: [phone removed by eBay]
Fax: [phone removed by eBay]
Pacific Die Services Inc.
7626 Baldwin Place Whittier, CALIFORNIA 90602
UNITED STATES
Rick Synadinos PRESIDENT/OWNER
Web: [link removed by eBay]
Rick Synadinos Email: [email removed by eBay]
[phone removed by eBay] land line
[phone removed by eBay] (Cell)
[phone removed by eBay] (Fax)
Crystal Industries Inc.
[phone removed by eBay]
28870 Phillips Street
Elkhart, INDIANA 46545 UNITED STATES
[email removed by eBay]
KEVIN ANTHONY, PRESIDENT OWNER,
RICH RUSSEL MAINTENANCE MANAGER
PACIFIC RADIATOR - Langley BC
Fahim Naheemi <[email removed by eBay]>
#102-20583 Langley Bypass, Langley, British
Columbia,
Canada, V3A 5E8
Sales: [phone removed by eBay]
Toll free: [phone removed by eBay]
Fax: [phone removed by eBay]
Administration: [phone removed by eBay]
Toll free: [phone removed by eBay]+
K&K Manufacturing Inc.
951 Nine Mile Road NW, Sparta, MI 49345 UNITED
STATES
[phone removed by eBay]
Fax # [phone removed by eBay]
Toll Free Order # 1(800) 876-4286
Skype ID: KK Manuf.
Email: [email removed by eBay]
webmaster:[email removed by eBay]
Colin Kidder,
B.E.E , ELCTRONICS ENGINEER
EMBEDDED SYSTEMS ENGINEER
Electro-Techno INC (Les Services)
https://electrotechno.com
Address: 2055 Rue Roy, Sherbrooke, QC J1K 1B8,
Canada
Phone: +1 866-566-5151
Electronics engineer in Sherbrooke, Canada
JEAN BOULAY 8195665157
DR EPIC MFG
Address: 3989 County Rd 40 NW, Garfield,
MN 56332, United States
Phone: +1 320-834-2003
D.R. EPIC-TMS United States of America
Email: [email removed by eBay]
Phone: [phone removed by eBay] or [phone removed by
eBay]
A STELLA LASER SERVICE
DEAN RASINK FACTORY ROFIN LASER - FINN POWER
TECHNICIAN
Or [phone removed by eBay].
107 Ridgeview Drive
Starbuck, MN UNITED STATES 56381
Prommetizizdeliya, Belarus,
StalNik (ODO Prommetizizdeliya)
Belarus, Baranovichi
Stecenko Nikolai Nikolaevich
Warehouse: Brestskaja obl. town
Baranovichi street: Proletarskaja 46
Tel. +375 (163) 68-09-09,68-08-09
Mob. +375 (29) 685-03-27, +375(29) 726-82-17
EMAIL : [email removed by eBay]
www.stalnik.by
Покупатель:
ОДО «Промметизизделия
(ALC «Prommetizizdeliya»)
Адрес: 225406 Республика Беларусь,
Брестская обл., г. Барановичи,
ул. Брестская, 226-В
УНП 290472675
р/с BY24BAPB30124416700110000000
в ОАО
«Белагропромбанк», г.Минск, пр.Жукова,3
Тел/факс +375 (163) 68-09-09, 68-08-09
Бухгалтерия: +375 (163) 60-80-28
Эл.почта: [email removed by eBay]
в лице директора
Стецко Николая (Stetsko N.),
действующего на основании Устава
Meik u. Karsten Müller Gbr
Steintechnik
Lerchenweg 1
35713 Eschenburg-Hirzenhain, Germany
Tel.: +49 (0) 2770 816
Fax: +49 (0) 2770 819
[email removed by eBay]
[link removed by eBay]
KARSTEN - PRESIDENT/OWNER
LASER COMPANY IN GERMANY
PHONE 4915123031054
VENOKA DENMARK
Ole Søndergaard
Mobile +45 2459 7802 | [email removed by eBay]
Michael Tudborg
Mobile +45 2033 1552 | [email removed by eBay]
Michael Tudborg – Venoka A/S <[email removed by
eBay]>
Thu, 12 Jan 2017, 17:57
Hi Paul, Just a little update…. The box was in
perfect condition when it arrived.
It´s now connected and running like new again
Thanks… Best regards Michael Tudborg –
Venoka A/S
Adr.: Mads Bjerres Vej 6 – 7500 Holstebro
Tlf.: 97412833 Direkte.: 20331552
Email.: [email removed by eBay] – Web.: [link
removed by eBay]
Venoka A / S | Mads Bjerres Road 6 | 7500 Holstebro
| Tel. +45 9741 2833
Laser Lab Wales Ltd UNITED KINGDOM
CRAIG EDWARDS. PRESIDENT/OWNER
Ely Distribution Centre Argyle Way
Cardiff CF5 5NJ
Tel: 07943103491
Email:[email removed by eBay]
GIMAT srl ITALY
TURBINE CUSTOMER
Claudio Magri PRESIDENT/OWNER
[email removed by eBay]
Via Dell'Artigianato 1-17
40064 Loc. Ponte Rizzoli
Ozzano dell'Emilia (Bo) - Italia
Tel +39 051 799573
Fax +39 051 798260
Web Site.: [link removed by eBay]
Descrizione:
cid:image001.gif@01CBFB61.610E07A0gimat_claudiomagri
FAGO Technik GmbH & Co KG GERMANY
Christian Braun
Gewerbestraße 20-2, D-78244 Gottmadingen
Tel/Fax: 07731-5915091/093
[link removed by eBay]
Christian Braun. [email removed by eBay]
Lister Engineering UNITED KINGDOM
William Lister PRESIDENT/OWNER
PRIMA POWER, PRIMA INDUSTRIES PRC/ CONVERGANT LASER
USA TECHNICIANEUROPE.
Director/Engineer at Lister Engineering And
Fabrication LTD. A proud partner ofTTM laser s.r.l.
Bristow Laser Systems
PETER BRISTOW, PRESIDENT/OWNER AND PRC LASER
TECHNICIAN
Manufacturer OF LASER SYSTEMS
24 Scammel St •(03) 9305 3166
Office Phone: + 61 3 9305 3166
Office Fax: + 61 3 9305 3788
Peter's Mobile: + 61 0438 364 118
Office Email: [email removed by eBay]
Office Address: 24 Scammel Street
Campbellfield, VIC AUST 3061 AUSTRALIA
Bristow Laser Systems
120 National Blvd • (03) 9357 0088
Preston Displays Pty Ltd
Richard PRESTON PRESIDENT/OWNER PHONE:0412842189
[email removed by eBay]
Plastic fabrication company in Dandenong South,
Victoria
Address: 2/16 Johnston Ct, Dandenong South VIC 3175
AUSTRALIA
ACUFORM CANBERRA AUSTRALIA
MATT PRESIDENT/OWNER PHONE 0418455574
Phone (02) 6260 2533
Fax (02) 6260 2544
Email [email removed by eBay]
5/73 Sheppard Street
Hume, ACT, AUSTRALIA
MACS ENGINEERING
Manufacturer in Mackay, Queensland
Address: 1C Victoria St, Mackay QLD 4740 AUSTRALIA
ROSS MACS PRESIDENT/OWNER PHONE 61498186347
Phone: (07) 4951 6555
JENNIFER TANDY
1800 88 MACS or
1800 88 6227
Telephone
(07) 4951 6555
2D Victoria St, Mackay, QLD
My contact is 07 49516517 or mobile 0427563397
Ballarat Pressings
KEITH PARRY, PRESIDENT/OWNER/ PHONE 0409177463 GREG
PARRY OWNER/SON PHONE0417157969
[link removed by eBay]
Address: 3181 Old Melbourne Rd, Warrenheip VIC 3352
AUSTRALIA
Ballarat Pressings. 3181 Old Melbourne Rd
Warrenheip 3352. Ph: 03 5334 7040.Fax: 03 5334 7440.
Advance Laser Cutting
Darryl Wilkes PRESIDENT/OWNER
[email removed by eBay]
Laser cutting service in Henderson, Western
Australia
Address: 139 Sparks Rd, Henderson WA 6166
Phone: (08) 9437 5550
Western Australia 6166 AUSTRALIA
PH: (08) 9437 5550
Fax: (08) 9410 2799
Email:[email removed by eBay]
Glyde Metal Industries Pty Ltd
RUSSEL PRESIDENT/OWNER
PHONE 61Z 409 577 215
Metal fabricator in Dandenong South, Victoria
Address: 65 Zenith Rd, Dandenong South VIC 3175
AUSTRALIA
Phone: (03) 9791 3402
IMTS LASER SPECIALISTS.
Peter Tucker DIRECTOR/OWNER,
PRIMA POWER/PRIMA INDUSTRIES ITALY,
FARLEY LASERLAB AUSTRALIA, PRC LASER USA,
CONVERGENT LASER USA, IPG FIBER LASER,
PRC LASER TECHNICIAN. PHONE: cell 0412326542.
MIKE HIGGINSON: PRIMA POWER/ PRIMA INDUSTRIES
ITALY,
FARLEY LASERLAB, CONVERGENT LASER,
IPG FIBER LASER, PRC LASER SERVICE
ELECTRONICS ENGINEER/ TECHNICIAN. PHONE: cell
0413966576.
(International +61 3 9314 9888)110 Proximity Drive
Sunshine West, VIC 3020
Australia
JP Laser Pty. Ltd.
Paul McCormack PRESIDENT/OWNER
Phone: (03) 8339 7412
Fax: (03) 9308 397
Factory Address: 18A Yellowbox Drive Craigieburn
Vic. 3064 AUSTRALIA
Postal Address: PO Box 3445 Caroline Springs Vic.
3023 AUSTRALIA
Paul McCormack OWNER
PHONE: 61 412 924 892
MEBIUS Pty Ltd
IGOR. Director /Owner
B.E.E -ELECTRONICS ENGINEER –
EX OEM FACTORY ROFIN SINAR
LASER SERVIVE ENGINEER
BYSTRONIC POWER SUPPLY O/H REPAIRS,
CONVERGANT CV5000 DV DC-DC HV SMPS HVPS OVERHAULS
MELBOURNE, AUSTRALIA
Ph: 0404040920
Email: [email removed by eBay]
THINK LASER
DENNIS JIGAU. Director /Owner
PHONE: 0424152557
Laser cutting service in Carrum Downs, Victoria
AUSTRALIA
[link removed by eBay]
(03) 8566 9133
Trigg Industries.
Mildura Laser Cutting Pty Ltd
Fast Farm Fencing
Head Office 27 Dyar Avenue, Cabarita VIC 3505
Australia
RODNEY TRIGG, Director /Owner
Postal Address: PO Box SM403, South Mildura VIC
3501 AUSTRALIA
Tel: 61 3 5022 2219
Mobile: 0417 347986
Fax:61 3 5022 2291
[link removed by eBay]
ABC CUTTING INDUSTRIES
DAVID PISASALE Director /Owner
2 RUTHERFORD ROAD
SEAFORD 3198 VICTORIA AUSTRALIA
PH: 97751025
Yarroweyah Engineering
4346 Murray Valley HWY
Yarroweyah VIC 3644 Australia
TELEPHONE: +61 3 5873 2383
FAX: +61 3 5873 2578
EMAIL: [email removed by eBay]
CNC MAN Pty Ltd
Address: 46 Greenfield Rd, Capalaba QLD 4157
AUSTRALIA
Phone: (07) 3206 4409
OWNER; WAYNE HOPE
CNC Machine tool sales and service
A GRADE CERTIFIED SENIOR INDUSTRIAL ELECTRICIAN +
EX OEM FACTORY FANUC, CO2 LASER SERVICE TECHNICIAN.
Expert Laser Solutions
2/ 3 David Muir Street, Slade Point QLD 4740
AUSTRALIA
[email removed by eBay]
PRESIDENT/OWNER, PAT MULHERN
PRC/ OEM BRISTOW LASER
TECHNICIAN (07)4955 3331
JT Profile
4 Avey Road
Mount Gambier South Australia 5290
AUSTRALIA
Tel: 08 8725 7857
Mobile: 0400 233 421
Email: [email removed by eBay]
OWNER: Josh Knightly
Heidelberg General Engineering
27 Commercial Drive
Thomastown Victoria
Australia 3074
Telephone: (03) 9464 1088
Fax: (03) 9464 1359
Email: [email removed by eBay]
OWNER : JOHN
Concrete Equipment Australia Pty Ltd
CEA Consolidated Industries
136-140 Maffra Street
Coolaroo
Victoria 3048
Australia
Phone: +61 3 9309 1500
Fax: +61 3 9309 1566
Email: [email removed by eBay]
OWNER: MIKE
This listing and or parts this listing are owned
and developed by Aerospace Dynamics Aust, and are COPYRIGHT 2024 it comes under
the protection of the eBay laws firstly, if you copy it and or sections of it
there will be consequences firstly from eBay Inc.
Click here to purchase or contact the seller of this item on eBay