Bendix/King KS-270C Primary Servo (Overhauled) P/N:065-00178-2200*Note*Click here to purchase or contact the seller of this item on eBay |
||
Current Price: 2,295.00 USD |
Bendix/King KS-270C Pitch Servo (Overhauled)
P/N: 065-00178-2200
Unit has a Factory Overhauled Motor.
Unit comes with a FAA-8130.
Overhauled unit comes with a 3 month warranty from date of sale.
Features:
Trim Servo used to provide AFCS control of the elevators
Contains a servo motor with amplifier and an engage clutch, as well as a torque sensor for trim command generation
Outputs a dual-channel trim sense signal with a scale factor of 100mV/in-lb., with a positive differential voltage representing CW torque
Maximum sensed torque is at least 20 in-lb. in each direction
Also contains a tach feedback signal to provide servo motion sensing
Outputs a differential signal with a scale factor of approximately 5.3V for full servo speed
Is installed with a KM 275 servo mount, which contains a slip clutch for pilot override
The servo receives a differential command input and drives the servo motor with a speed proportional to the magnitude of the command
The command polarity will determine direction of the servo rotation
The command inputs have an impedance of at least 15K ohms
The interface is designed such that an open command signal will not cause a servo drive of more than 25% of full-scale speed
Contains a validity circuit which compares the motor voltage against the servo command
The actuator outputs a open/ground discrete signal, where ground represents a valid servo
If the comparison fails, the servo outputs an invalid signal to the FC
Shipping will be UPS only.
Most units shipped within 1-2 business days.
We are closed on weekends and major holidays.
We do not ship internationally.
Shipping only to the Continental United States including Hawaii and Alaska.
Click here to purchase or contact the seller of this item on eBay