Dynon Skyview Classic SV-D700 EFIS, with HarnessClick here to purchase or contact the seller of this item on eBay |
|
|
| Current Price: 2,199.00 USD |
Up for auction is a 7" Dynon Skyview Classic EFIS Brand New Never Used. Unit has Firmware version 15.3.3.
S/N 2685
Does come as pictured.
Retail cost on this is $2,700.
SV-D700 7” SkyView Display
Pilots
new to glass can transition with ease utilizing SkyView's new
"six-pack" primary flight instruments. Familiar round gauge depictions
bridge the classic "retro" instruments with the state-of-the-art. Pilots
can switch between six-pack and the modernized EFIS display
instantaneously. Six-Pack mode is included in the free SkyView 10
software update.Dual and Large Engine Support
Customers with two engines can now equip with dual EMS modules to monitor each engine independently. Two engine modules can also be used by pilots with larger engines to monitor all of their EGTs and CHTs, eliminating the need for them to choose which cylinders to monitor. Up to 28 total EGTs and CHTs can be monitored along with all other typical engine sensors.VFR Sectionals and IFR En-route Charts
SkyView's map gains geo-referenced VFR sectional charts and IFR Lo/Hi charts with SkyView 15 software. In another breakthrough pricing move, ALL US charts are available through a partnership with Seattle Avionics at no price increase from the existing procedure chart subscriptions. This means that $99 will buy customers a year of IFR/VFR procedure charts (plates), VFR sectionals, IFR Lo/Hi charts, and all FAA and Flight Guide airport diagrams. All products are geo-referenced. With US digital airport/aviation/obstacle data available free from Dynon's website, there aren't any added hidden database costs. SkyView customers in the US can have a complete paperless cockpit for under a hundred dollars a year.(Includes SV-D700/A 7” Display, SV-HARNESS-D37, and SV-SYNVIS-280 Synthetic Vision)
SkyView Displays:
Very bright, high-resolution screens driven by advanced graphics
processors create highly visible and readable display. Even in direct
sunlight!
SkyView Displays utilize TFT active matrix LCD
screens and LED backlighting technology for increased life span, more
uniform brightness, and reduced power consumption.
Buttons and Joysticks: The SkyView System is designed for ease of use while flying. The most used functions are accessed via two rotary/multi-direction Joysticks, for fast intuitive commands. Almost all other in flight commands, using the widely spaced buttons, are only two button presses away. None or more than three button presses.
Redundancy: If two displays are in the system, either one can act as the Primary Flight Display, Moving Map, and Engine Monitor. The unlikely loss of either display will not affect the functionality of the other.
System Battery Backup: A system backup battery will provide over an hour of backup power to a Display and Modules. Each Display requires its own Backup Battery for redundancy.
Connections: Each display contains:
1 - 37-Pin DIN Connector for the main wiring harness
2 - 9-Pin DIN Connector for the SkyView Networks
2 - USB Connectors
1 - Ethernet Connector, used to synchronize data between displays.
Main Harness:
A main wiring harness is included with each display. It connects to the
display via the D37 connector, with leads to connect to:
* Primary power
* USB Connector on a 3-foot lead
* 5 serial ports, including one for GPS NMEA input
* Audio output
* 4 Discrete general purpose inputs
* Panel dim input/output
* Battery backup connector
|
|
|
|
|
Click here to purchase or contact the seller of this item on eBay